FoggyStop | Guide
Česky Slovensky Deutsch


Directions for use

Quick Guide

1. Remove the plastic bag inside the car.
2. Attach the Velcro holders on the headrest, door handle or anywhere else in the car where it will not impede the driver's vision and will hang in space.
3. If the dial indicator with humidity is more than 50% (pink inscription) longer than 1 month, it is possible that under extreme conditions, fog or frost formation can occur on the inside of windows. If the product is used more than one month and a moisture indicator still show more than 50%, it is necessary to regenerate the content – to remove absorbed moisture in the product follow the process in Part A. Regeneration.

FoggyStop is an innovative product that prevent fogging and formation of frost on the glass inside the car. No more cloths, scrapers or spray.
Automatically maintains the humidity in the car below the dew point and therefore frost or freezing fog can´t occur due to physical laws.

A. REGENERATION

If the dial indicator with humidity is more than one month over 50% (pink inscription), it is possible that under extreme conditions, fog or frost formation can occur on the inside of windows. If the product is used more than one month and a moisture indicator still show more than 50%, it is necessary to regenerate the content

1. Removing moisture from the product by inserting into the microwave: Place on a plate in a microwave oven at full power settings and set time to 2 minutes (at power 800 W). Attention! Before removing from oven wait at least 10 minutes! The product will have a high temperature burns.
2. Removing moisture from entering the product into an oven: Set the oven thermostat to 150 degrees C. Turn the oven temperature and put into the oven for 5 minutes. Turn off oven and cool for 30-60 minutes, remove from the oven using a potholder cooking. Attention! RISK OF BURNS.

B. SECURITY

PRODUCT DOES NOT CONTAIN ANY MATERIALS THAT CAN CAUSE HEALTH PROBLEM. The product is made from specially oxidized silicon, which is nontoxic, nonflammable and chemically highly inert. The surface of crystals is up to 800 m2 / g at a fill weight 140 g represents the surface of 1,120,000 square meters for collecting moisture. The product has a double cover, so there is a little risk of emptying the contents while the product is normal used. Avoid pushing the product with sharp objects. In a case of cut packaging and pouring the contents, clean your car with vacuum cleaner thoroughly. The product is not intended for play by children. When you have kids in the car less than 3 years of age, position the product so they cannot achieve it.

FIRST AID

In case of ingestion or inhalation of the contents there is no acute health hazard, yet it is necessary to immediately see a doctor to determine next steps.


SignUs Design by SignUs

Terms and conditions

Copyright TRAIVA (c)2011-2019